Custom lighting made by UK makers
Need It Made is a UK marketplace where you can get a custom lamp, lampshade or light fitting made. Describe what you need, 14 listed UK Makers can quote, and your payment is held until it's delivered.
14 makers2 pieces madeBristol, Crediton, Harpenden and 6 other townsPayment held until you approve
What can be made, and how do I brief it?
A tide-predicting light and an artistic lamp: one-off lights made for one room. Makers here also take on pendant shades and lampshades made to one size, table and floor lamp bases, wall lights, backlit signs and replacement diffusers for fittings you can't buy any more.
Say where it will hang or stand, how big the space is, and which bulb fitting you want, such as E27, E14 or GU10, because the bulb decides how much heat the shade has to cope with: a printed shade that is fine around an LED can soften around a halogen. Say whether you want a finished light, wired and ready to plug in, or a shade or base for parts you already own. Anything wired into the mains or fixed to a ceiling needs a Maker qualified for that work, so put it in the brief. Photos of the room help more than a description. Most lighting work takes two to five weeks.
What people ask for
Cost, timescales and common questions
How much does it cost?
There aren't enough completed jobs in this category yet to give a fair typical price, so we don't quote one. Size, material, and whether you want a finished light wired and ready to plug in move the price most. Posting a brief is free, and Makers quote for your exact job.
How long does it take?
Most lighting work takes two to five weeks.
What should I send a Maker?
Where it will hang or stand, the size of the space, the bulb fitting (such as E27, E14 or GU10), and whether you want a finished light or a shade or base for parts you own.
Where can I get a bespoke lamp or pendant light made in the UK?
Need It Made is a UK marketplace where you can describe the light you want and get quotes from Makers who work in wood, metal and 3D printed parts; pieces on the site include an artistic lamp and the TideLight. Say where it will hang or stand, the size, the bulb fitting, and whether you want a finished, wired light or just the shade or base.
What should I check before using a handmade mains light?
Ask the Maker how the light was wired and tested, and what safety marking it carries, before you plug it in or have it fitted. If anything is unclear, have a qualified electrician check it, and use an electrician to connect any ceiling light to your wiring. If you buy only a shade or base, fit it with a marked lampholder and cable set rather than improvised parts.
Can I get a replacement part made for an old light fitting?
Often, yes: parts that carry no current, such as a shade holder, finial, arm or bracket, can be remade by 3D printing, casting or machining from the original or clear photos. Measure the thread or fitting size, the shade opening and how it fixes. Anything that carries current, such as a lampholder or cable, should be a new certified component rather than a copy.
What should I measure for a made-to-size pendant or ceiling light?
The ceiling height, the height you want the bottom of the light to hang at, and the width of the table or space beneath it. Add the bulb fitting (such as E27, E14 or GU10), how many lights you want, where the ceiling rose is, and whether the light must fit a sloping ceiling. Photos of the room help the Maker judge the scale.
Can I get just one made?
Yes. Most jobs on Need It Made are one-offs. Posting a brief is free, and a photo, a sketch or a plain description is enough to start. Makers send quotes for exactly what you asked for, and you pay nothing until you accept one.
What if it goes wrong?
Every job goes out by tracked courier, and the Maker is not paid until the delivery is confirmed and you have had 48 hours to check the piece. If it doesn't match what you agreed, raise an issue in that time and your money stays where it is while it is sorted out under the Refund Policy.
Last updated 20 November 2026
Related pages and guides
Which UK Makers take on this work?
Myles BatesUK
Kevin JabouLondon (Cm14)
Charles CarterHarpenden (Al5)
Matthew Newlove-FriendCrediton (Ex17)
David WardUK
David SedgwickSheffield (S35 7AS)
Scott AstburyNantwich
Tom CroslandLeeds

